Electronic Signature Pad Accessories

IDSL provide all your signature tablet supplies - batteries, spare pens, nibs, cable extensions. In addition, there are a few specific accessories to enhance the range of signature tablets including carry-pouches and overlays.


  1. Ethernet adapter
    Ethernet!

    Ethernet adapter

    Code: A-ETH1-1-R

    The Ethernet Adapter (model number A-ETH1-1) is only for use with 9-PIN serial signature pads (ending in "-B-R" or ending in "-BHSB-R" when used in Serial mode).

    This accessory allows for plug-in to a local network through a standard ethernet connection.

    £189.99 (Ex VAT)

  2. SigLite 1x5 Overlays (triple pack)

    Code: A-OLSL-3-R

    The A-OLSL-3 overlays are designed to protect your SigLite® 1" x 5" signature pads.

    £19.99 (Ex VAT)

  3. Pen for KioskGem (non-removable tip)

    Code: P-T110-T1-R

    This "Active" pen is designed to work with and connect to the KioskGem Backlit LCD 1x5 units (T-LBK462-KB-R, T-LBK462-KHSB-R).

    It has a rugged steel tether that is crimped onto the pen, and a bolt through the battery cap to prevent unwanted removal.

    £59.99 (Ex VAT)

  4. Pen for KioskGem (removable tip)

    Code: P-T110-S1-R

    This "Active" pen is designed to work with and connect to the KioskGem 1x5 units (T-S261-KS2-R, T-S261-KH2-R).

    Ink Pen Nib included.

    Ink Pen Nib Included

    £59.99 (Ex VAT)

  5. Pen for SigGem 1x5

    Code: P-T111-B-R

    This "Active" pen is designed to work with and connect to the SignatureGem 1x5 units (T-S261-HSB-R, T-S261-B-R).

    It supplied with batteries (installed), a nylon nib (installed) and a spare inked nib.

    Ink Pen Nib Included

    £47.99 (Ex VAT)

  6. Pen for SigGem 4x5

    Code: P-T112-B-R

    This "Active" pen is designed to work with and connect to the SignatureGem 4x5 units (T-S751-HSB-R, T-S751-B-R). It is supplied with batteries (installed), a nylon nib (installed) and a spare inked nib.

    Ink Pen Nib Included

    £49.99 (Ex VAT)

  7. Pen for ClipGem

    Code: P-T113-B-R

    This pen model is designed and calibrated to work with the Clipgem family of products. 

    Hard-wearing with an inked-bib, the pen is secured to the pad with a coiled nylon tether.

    Spare inked nibs are available separately.

    Ink Pen Nib Included

    £49.99 (Ex VAT)

  8. Pen for SigGem LCD Products

    Code: P-T110-L1-R

    The P-T110-L1 is one of two pens for use with the SignatureGem LCD 1x5 and IDGem LCD 1x5. Features a curly tether, loop connector, and non-removable pen tip.

    £49.99 (Ex VAT)

  9. E-Tether Pen for Mid and Large LCD Units

    Code: P-ET110-H-R

    E-Tether pen calibrated for 4" x 3" SignatureGem Backlit LCD ; 4" x 5" SignatureGem Backlit LCD ; and Signaturegem Color units.

    £49.99 (Ex VAT)

  10. 10 Ink Tips

    Code: A-PT01-6-R

    Replacement inked pen nibs designed to fit signature capture pens. Pack of 10.

    £39.99 (Ex VAT)

  11. 5 Plastic / 5 Ink Tips

    Code: A-PT01-4-R

    Replacement pen nibs designed to fit signature capture pens for our SignatureGem and ClipGem and KioskGem models. 

    Pack of 10 (5 Inked 5 nylon).

    £34.99 (Ex VAT)

  12. 10 Plastic Tips

    Code: A-PT01-5-R

    Replacement nylon pen-tips designed to fit our SignatureGem pens.

    Pack of 10.

    £29.99 (Ex VAT)

  13. Pen for SigLite

    Code: P-TS01-B-R

    The P-TS01-B is intended and optimized for use with SigLite® pads.

    The pen is battery-less, with a loop connector, curly tether, and non-removable pen tip.

    £34.99 (Ex VAT)

  14. Y-Cable Set

    Code: A-CSA4-3-R

    The Y-Cable set allows users to connect our serial LCD devices to a spare USB or PS/2 to draw extra power when the PC serial connection output is too small.

    Note: the serial unit still has to be connected to the serial connector on the PC for data communications.

    Serial Detachable Cable

    £29.99 (Ex VAT)

  15. T-S751 4x5 Overlay (pack of 3)

    Code: A-OL45-3-R

    The A-OL45-3 overlay is designed to protect your SignatureGem 4x5® signature pads.

    £29.99 (Ex VAT)

  16. Batteries for all pen types

    Code: A-BT01-2-R

    Pen batteries for all battery-powered pens.

    Batteries are supplied in pairs. User-installation is straightforward.

    £1.44 (Ex VAT)

  17. Overlays for SigLite 4x3 LCD Models

    Code: A-OL43-3-R

    The A-OL43-3 overlay is designed to protect your SigLite® Backlit LCD 4x3 signature pads.

    Pack of 3

    £39.99 (Ex VAT)

  18. Overlay for SigLite Colour LCD Unit

    Code: A-OL43-2-R

    The A-OL43-2 slide-in screen overlay is designed to protect your SigLite® Colour LCD signature pads. Pack of 3

    £39.99 (Ex VAT)

  19. E-Tether Pen for 1x5 LCD models

    Code: P-ET110-HSN-R

    E-Tether pen calibrated for 1x5 sized LCD units

    £49.99 (Ex VAT)

  20. Carrying Case for 1x5 Units

    Code: A-CP15-2-R

    The our 1x5 carrying case (model number A-CP15-2) is designed to hold and protect your 1x5 signature pad.

    It features Neoprene-cushioning, a Velcro-seal, and convenient clip-on hook and belt loop.

    £46.99 (Ex VAT)

  21. Tilt Stand for LCD Pads

    Code: A-TSL1-1-R

    Our tilt stand (model number A-TSL1-1-R) is designed to hold our LCD signature pads.

    For your convenience and desired security, the stand can be mounted on either the counter or the wall.

    With the tilt stand's 360 degree rotation and up-to-45 degree tilt, your signature pad can be easily positioned during the signing process.

    £129.99 (Ex VAT)